02 6260 1888 | 10 Raws Cres, Hume ACT 2620 Australia

PolyFlow

Cartridges-Polypropylene Depth Filters

PolyFlow pleated cartridge is constructed with all polypropylene components with optimized pleat height and density. It provides universal chemical compatibility, lower pressure loss, and long life in demanding process applications including pharmaceutical, biological, chemical, electronic, food and beverage filtration.

 

PolyFlow cartridge is available in 7 pore sizes from 0.2 um to 60 um to match the flow, differential pressure, and retention requirements of virtually every microfiltration need. No adhesives are used in the fabrication of chemically resistant PolyFlow cartridge.

 

PolyFlow cartridge functions equally well as a prefiltration in water and aggressive chemicals and as a final filter where nominal-rated microfiltration is required.

 

 

Performance Advantages

  • All-polypropylene construction offers superior chemical resistance
  • Cartridge filter incorporates with several layers of melt-blown polypropylene web to provide long filter life and outstanding separation performance
  • Thermal bonding eliminates risk of extractables from sealing materials
  • Filters are sanitizable by most common methods and sterilizable by autoclave and steam
  • Filtration medium passes USP Class
    VI-121 ℃Plastics Tests for biosafty
  • Each filter is traceable with engraved product number and pore size for easy identification

Typical Applications

  • Pharmaceutical: Parenterals, Ophthalmics, Veterinary parenterals and sera, Oral and topical medicines, water
  • Cosmetics: Toiletries, Perfumes and colognes, Shampoo, Creams, Lotions, Ointments, Mouthwashers, Oils, Make-up water 23
  • Biological: Serum, Blood fractions, Tissue culture media, Vaccines, Liquid growth media, Make-up water, Fermentation additives
  • Electronics: Acid, Bases, Etchants, Photoresists, Solvents, Pretreatment of DI and RO water, General prefiltration prior to point-of-use
  • Food and Beverages: Wine, Beer, Flavors, Soft drinks, Juices and other potable liquids, Water
  • General: Rinse water, DI and RO pretreatment, Acids, Bases, Paints, Gases, Audio/video/computer tape and discs, Photographic fine chemicals

Materials of Construction

  • Filter Media: Pleated non-woven polypropylene
  • Support Material: Polypropylene
  • Structure Components: Polypropylene
  • Sealing Technology: Thermal Bonding

Nominal Length
10, 20, 30, 40 inch
(25.4, 50.8, 76.2, 101.6 cm)

 

Diameter 2.7 inches (6.9 cm)

Maximum Operating Temperature*
82°C (180°F), 10 psi (0.7 bar)

*Supported adapters are recommended for applications at elevated temperature over 55 °C

 

Sterilization/Sanitization Methods

Chemical: Peracetic acid, chlorinated alkaline products, bleach, sulfur dioxide, and hydrogen peroxide at typical sanitization concentrations and temperatures
Hot Water: 88 °C (190 °F), 5 psi (0.34 bar)
Autoclave: 121 °C (250 °F) for 30 minutes up to 5 cycles
In-line Steam: 134 °C (273 °F) for 60 minutes at 3 psi (0.21 bar) maximum differential pressure

 

Maximum Back Pressure
40 psi (2.8 bar) at 60 °C (140 °F)

Maximum Differential Pressure

60 psi (4.1 bar) at ambient temperature


Nominal Pore Size
0.2, 1, 3, 5, 10, 30, 60um

 

Maximum Continuous Pressure

Limited by housing


Typical Effective Filtration Area
10 inch (25.4 cm)
0.2, 1 um 5 ft2 (0.5 m2)
3.5, 10 um 6 ft2 (0.6 m2)
30, 60 um 7 ft2 (0.7 m2)


20 inch (50.8 cm)


0.2, 1 um 10 ft2 (1 m2)
3, 5, 10 um 12 ft2 (1.2 m2)
30, 60 um 14 ft2 (1.4 m2)


30 inch (76.2 cm)
0.2, 1 um 15 ft2 (1.5 m2)
3, 5, 10 um 18 ft2 (1.8 m2)
30, 60 um 21 ft2 (2.1 m2)


40 inch (101.6 cm)
0.2, 1 um 20 ft2 (2.0 m2)
3, 5, 10 um 24 ft2 (2.4 m2)
30, 60 um 28 ft2 (2.8 m2)

 

 

*

Name is required

*

Address is required

*

Email is required

*

Phone/Mobile is required

*

Product Code is required

*

Enquiry Details are required